IEX-2 card id
--------------------------------------------------------------------------------
card id module name     description
ccccccc nnnnnnnnnnnnnnn dddddddddddddddddddddddddddddddddddddddddddddddddddddddd
--------------------------------------------------------------------------------
0       BCM             Broadcast master, virtual module for sending broadcast messages
1       OP-1            Operator panel: LCD 2x16, 5 keys, IR receiver, temperature measurement, beeper (obsolete)
2       FC              Fan-coil controller, 3+2 relay outputs, binary/analog input, 2 temperature sensor inputs, fallback mode
3       TS              Temperature sensor, internal + external
4       8C              Universal I/O module, 4 binary inputs, 4 relay outputs (obsolete)
5       LC-S            Light controller: 4 analog output 0..10V, multisensor input, 3 analog/digital inputs, 2 digital inputs
6       LC-D            Light controller: DALI output, DSI output, multisensor input, 3 analog/digital inputs, 2 digital inputs
7       HR              Hotel room controller, 10 relay outputs, 12 binary inputs, 2 temperature sensor inputs
8       SW-L            4x/3x/2x compact switch module, normally-open and normally-closed contacts, 4x LED illumination (obsolete)
9       SW-W            4x switch input, 4x switch input (option), 2x potentiometer input (option), 2x LED output (option) (obsolete)

10      OP-2            Operator panel: LCD 2x16, 5 keys
11      Bio-24          Binary 12 inputs/12 outputs, 4 fast counters
12      AiR-12          12-channel analog input Pt100/1000, Ni100/1000, R200/2000, 2 or 3-wire
13      AiV-12          12-channel analog input 0..10V
14      AiC-12          12-channel analog input 0..20mA
15      AoV-12          12-channel analog output 0..10V
16      IMU             Inverter management unit (obsolete)
17      IPU             Hitachi SJ300/L300P inverter programming unit (obsolete)
18      OP-3            Operator panel: LCD 2x20, 5 keys, 4 leds, IR receiver, internal temperature, humidity, beeper, switch/potentiometer, external temperature
19      O2              Two relay outputs with mains sense inputs

20      OP-4            Operator panel: LCD 2x20, encoder, IR receiver, light sensor, beeper, 4x switch/potentiometer input, 2x external temperature
21      IMU-MB          High-speed control unit for 4 Hitachi L200/SJ200 inverters (obsolete)
22      Bio-8R4         8 relay outputs with mains sense inputs, 4 mains inputs, fallback mode
23      SW-W2           4x switch/potentiometer input, 4x LED output with intensity control
24      SW-W3           4x switch or potentiometer input, 4x switch input or LED output with intensity control
25      LC-DC2          Light controller: DALI/DALI-2 send (16/24-bit) and receive (8-bit), DALI power supply, 10 digital inputs
26      TS-H            Temperature sensor, internal + external, humidity
27      LC-DC           Light controller: DALI/DALI-2 send (16/24-bit) and receive (8-bit), multisensor input, 2 analog/digital inputs
28      OP-5            Operator panel: LCD 2x20, 5 keys, IR receiver, internal temperature, humidity, beeper, switch/potentiometer input, external temperature
29      COM-DMX         Serial controller for DMX-enabled lights

30      COM-ABUS        Serial module with A-bus protocol
31      CR-W2           Card reader for 2 Wiegand RFID receivers, 2x relay output, 4x switch/potentiometer input
32      SMB-10          String monitor box: 20 currents (p+n), 20 fuse monitors (p+n), voltage, reference cell, 4x relay output, 4x binary input, alert led
33      COM-PCS         Serial RS232 module with PCS protocol for Sanrex inverters (obsolete)
34      COM-PRN         Module for sending data to serial printer (obsolete)
35      GSM-1 3.2       GSM module v3.2, SMS/Voice/GPRS with plc access, 4x binary/analog input, 2x relay output
36      Bi-24           6 binary inputs/outputs, 6 binary/analog inputs, 12 binary inputs
37      OP-6            Operator panel: 3x 7-seg LED, 4x LED, IR receiver, light sensor, beeper, switch input, internal and external temperature sensor
38      COM-WXT         Serial communication adapter for Vaisala weather transmitter WXT520
39      RC-A            Recuperator controller, configurable 0..24V fan speed output, fan direction output, 3 open-collector outputs, 2 temperature sensor inputs, 2 binary/analog inputs

40      GW-MP           Gateway for Belimo MP-bus communication
41      SW-W3-TIR       4x switch or potentiometer input, 2x temperature sensor input, IR-reciever input
42      GW-ENO          Receiver for EnOcean switches
43      COM-SAT         Satcon inverter serial communication adapter
44      COM-SAN         Sanrex inverter serial communication adapter
45      COM-KAC         KACO Powador serial communication adapter with auto-selectable inverter type
46      COM-PMI         Serial adapter for Iskra/Eastron power meters
47      COM-NOK         Serial adapter for up to eight 4-noks ZigBee relays
48      Bio-20          10 relay outputs, 10 digital inputs
49      SMB-8           String monitor box: 8/16/24 currents, voltage, PV reference, temperature sensor, surge protector and disconnector monitoring inputs, 2x binary output

50      HR-2            Hotel room controller: RFID reader/holder 19.2kbps, internal/external IEX bus, fan coil, door lock, autoaddress 800
51      COM-BON         Serial communication adapter for Bonfiglioli PV inverter
52      HR-2-IO         Hotel room controller as generic i/o module
53      OC-1-IQ         Office controller, 3x lights, 3x DALI dimmer, 1x blinds, 1x fan-coil, valve output 0..10V, 5x sensorr, autoaddress 100
54      SC-4T-IO        Scene controller as generic i/o module
55      OP-8            Operator panel: LCD 2x20, 5 keys, IR receiver, light sensor, beeper, switch input, internal and external temperature sensor
56      COM-MB          Modbus RTU master
57      GW-ENO2         Bidirectional transciever for EnOcean devices
58      COM-PGM         Free programmable serial port
59      FC-2            Fan-coil controller, 0..10V output, 2 relay outputs, binary/analog input, 2 temperature sensor inputs, fallback mode

60      LC-10-IQ        IQ controller for 10 lights, autoaddress 100
61      LD-V4-IQ        IQ dimmer for 4 lights, RGB mode, autoaddress 120
62      LD-D8-IQ        IQ dimmer for 8 DALI outputs, autoaddress 120
63      BC-5-IQ         IQ controller for 5 blinds, autoaddress 200
64      SC-4S-IQ        IQ controller with four scenes based on SW-W3, autoaddress 300
65      TH-1M-IQ        IQ thermostat controller based on OP-6, autoaddress 400
66      TH-2-IQ         IQ thermostat controller based on TS-H, autoaddress 400
67      FC-1-IQ         IQ fan-coil controller, autoaddress 420
68      LD-P4-IQ        IQ dimmer for 4 lights, RGB mode, autoaddress 120
69      TH-3-IQ         IQ thermostat controller based on OP-5, autoaddress 400

70      TH-1T-IQ        IQ thermostat controller based on OP-6, autoaddress 400
71      SC-4T-IQ        IQ controller with four scenes with touch buttons, autoaddress 300
72      LD-V10-IQ       IQ dimmer for 10 lights, RGB mode, autoaddress 120
73      LC-8-IQ         IQ controller for 8 lights, autoaddress 100

IEX-2 card id (custom modules)
--------------------------------------------------------------------------------
100     OP-WASC2        Wasc-2 operator panel (16xkey, 16xLED 7-seg, 2xLED)
101     MD-2            LED matrix display, 2 characters (pirelja)
102     MP-4            MaxiPark 4 ultrasonic sensor interface (Actron) (obsolete)
103     IR-EPI          IR receiver with 100dB beeper and red/green leds (Epipack)
104     UM-C1           software-controlled switching power supply (CPA)
105     PV-FP           photovoltaic fast-pulse measurement (Robotina)
106     uCyBro-2        uCyBro as IEX module (Cybrotech)
107     GSM-SA          GSM stand-alone version (Cybrotech)
108     LC-D-PPF        LC-D with two additional digital outputs (Schrack)
109     COM-STU         Serial adapter for Studer inverters and BMS

110     AiR-12-KP250    AiR-12 with added KP250 copper-based sensor (CPA)
111     ROZ-V1          Multi Sensor upto 14 inputs/10 outputs + upto 4ADchannels + RC5 + RS232 (Rozman)
112     ROZ-V2          Multi sensor: 2xA/D, 2xPWM, 4 Inputs (2 key debounce filters) (Rozman)
113     IN-16           Binary 16 Inputs (also pullups can be configured) (Rozman)
114     IO-16           Binary 16 IOs each either input or output (also pullups can be configured) (Rozman)
115     COM-EM6         Serial adapter for Schneider EM6400 true RMS digital power meter (Robotina)
116     Bio-24-PWM      Binary 12 inputs/12 outputs, 4 fast counters, 6 PWM outputs (Schrack)
117     MPS-1           MaxiPark Sensor One, ultrasonic sensor and 3x 1W LED driver, autoaddress at 1 (Actron)
118     MPM-1           MaxiPark Master One, virtual module which unite function of 8 MPS-1 modules (Actron)
119     COM-BCM         Battery controller module for A123 Systems, CAN-CAN adapter (Mage)

120     COM-BAT         Generic battery adapter (Neovoltaic)
121     NeoPac          Neovoltaic neoPack storage-system for electrical energy (Neovoltaic)
122     TG-1            Target controller (pirelja)
123     COM-LIS         CAN adapter for Lishen Battery Management System and Battery Packs (Neovoltaic)
124     COM-VOL         Serial adapter for Voltronic InfiniSolar Hybrid PV Inverter (Neovoltaic)
125     SMB-16M         String monitor: 16 currents, voltage, internal temperature, surge protector
126     COM-REF         Communication controller for Refu battery inverter, COM-CAN adapter
127     BAT-FAAM        Faam battery management system (Neovoltaic)
128     DOORSON         Doorson automatic door controller (Doorson)
129     TG-2            Target controller (pirelja)

130     O2-L-24V-AD     Water safety valve for Adria dom (Devid)
137     RFMSND          Soundmodule, pressure sensor and RFM receiver (Gangl)